GB
Twin socket with timer
Operating instructions
Dear customer,
We wish to thank you for having bought our product. Please thoroughly read the following operating
instructions before placing into service and keep them for future reference. Pass on the operating
instructions to the following owner.
Intended use
The product is spray-protected, IP44 and for use outdoors.
The product conforms to the appropriate European CE directives.
General safety instructions
• Only have electrical work undertaken by authorized skilled personnel!
• Do not connect in series!
• Do not operate when covered!
• Deenergized state only with the plug pulled out!
• Not to be used by children!
• Do not operate the product if there is damage to the socket, timer or lead!
• Not for use in an explosive environment!
• Not for deployment in a harsh environment (e.g. on construction sites)!
• Ensure the ground is firm when you set up SteelCraft products using a ground spike or drive-in
tubes!
Description of the timer
The SteelCraft 2-fold socket with timer includes two operations for the sockets. The sockets can be
either manually switched on or operated automatically. Under automatic operation the timer swit-
ches the sockets on or off in keeping with your time requirements. There is a 24-hour programme
with a 15 minute minimum operating time.
Setting the time
Turn the dial clockwise until the current time tallies with the marking arrow.
Then immediately insert the product into the socket to start the mechanical time mechanism. The
time can also be set in the inserted state.
Setting the switching sequences
When delivered, all the white contact pins on the edge of the dial are pressed inwards i.e.
switched-off.
You determine the switch-on time by pressing outside the white contact pins on the edge of the dial
(pin corresponding to 15 minutes).
Pin outwards ---> clock switches on for these 15 minutes
Pin inwards ---> clock switches off for these 15 minutes
4