Operating Instructions - Lincoln Electric IMT10004 Manual Del Operador

Headgear Adjustment
PIN HOLES FOR
ADJUSTMENT
Head Size Adjustment: Headband tightness is adjusted by pushing in the
ratchet knob and turning to adjust to desired comfort level. This knob is
located at the back of the helmet. HEAD GEAR CROWN ADJUSTMENT is
made by adjusting crown strap for vertical placement on the head and snap-
ping the pin into the hole to lock securely in place.
Tilt: Tilt is adjusted on the left side of the helmet. TILT is adjusted by loos-
ening outside tension knob and releasing the adjustment lever from its cur-
rent location and moving it to another location. Retighten the outside tension
knob when finished.

OPERATING INSTRUCTIONS

TILT ADJUSTMENT
CROWN
ADJUSTMENT
2
RATCHET KNOB