Steam Ironing; Shot Of Steam - Rowenta FOCUS Instructivo De Operación

7 • Steam ironing
You can steam iron from temperature setting •• upwards.
Steam function*
steam quantity) and
setting to the maximum steam quantity
ture setting •••.
uto Steam function*
the steam quantity will adjust automatically to the soleplate temperature.
8 • Shot of steam
(from temperature setting •• upwards)
IMPORT NT Leave an interval of 4 seconds between each shot and wait until
the flow of steam is finished before standing the iron on its heel.
Press the shot of steam button
move stubborn creases (fig.14).
9 • Vertical shot of steam
(from temperature setting •• upwards)
TIP Hold the iron 10 to 20 centimetres away from the garment to avoid bur-
ning delicate fabrics.
Hold the iron in a vertical position and press the shot of steam button
( fig.15) to remove creases from suits, jackets, skirts, hanging curtains etc.
IMPORT NT Never direct the steam at persons or animals!
10 • Spray
Press the spray button
11 • nti-Drip system*
It prevents water from escaping out of the soleplate, when the temperature is
too low.
12 • utomatic electronic 3-position cut-out*
If the appliance is on but is not moved, it will automatically
switch off and the auto off light will blink after the following intervals (fig. 17):
- fter 30 sec., if the iron is left standing on the soleplate or lying on its side .
- fter 8 mins., if the iron is left standing on its heel.
To switch the iron back on, gentlymove the iron.
The steam level can be set to between no steam (minimum
(maximum steam quantity) (fig.12). We recommend
Set the steam button to
to generate a powerful jet of steam and re-
to dampen stubborn creases (fig.16).
only when the iron is at tempera-
(fig.13) and
6 * depending on model