Indicator Lights; Important Safety Instructions - Fellowes POWERSHRED 2326S Guia De Inicio Rapido

Ocultar thumbs Ver también para POWERSHRED 2326S:
Tabla de contenido

Publicidad

A .
B .
C.
D.
E.
F.

INDICATOR LIGHTS

Stops automatically
Stops automatically
when door is
when bin is full.
Empty bag when
opened. Symbols
bag full indicator
flash alternately
lights up
CAPABILITIES
Will shred: Paper, credit cards, CD/DVDs, staples, paper clips and junkmail
Will not shred: Adhesive labels, transparencies, newspaper, cardboard,
laminates, file folders, X-rays or plastic other than noted above
Paper shred size:
Strip-Cut .........................................................................3/16 in. (4mm)
Cross-Cut........................................3/16 in. x 1-1/2 in. (4mm x 40mm)
* In order to perform at capacity, shredder must be plugged into a dedicated 15Amp,
120V outlet.
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
• Keep away from children and pets. Keep hands away from
paper entry. Always set to off or unplug when not in use.
• Keep foreign objects – gloves, jewelry, clothing, hair, etc. –
away from shredder openings. If object enters top opening,
switch to Reverse (R) to back out object.
• Never use aerosol products, petroleum based lubricants or
other flammable products on or near shredder. Do not use
canned air on shredder.
• Do not use if damaged or defective. Do not disassemble
shredder. Do not place near or over heat source or water.
• Operation, maintenance, and service requirements are covered
in the instruction manual. Read the entire instruction manual
before operating shredders.
2
G.
KEY
H.
A. Safety Flap
B. Paper entry
C. Disconnect switch (open door)
D. Door
E. Basket - paper (inside)
F. Casters
G. See safety instructions
Stops automatically
Stops automatically
if too much
if safety flap is
paper is inserted.
opened. Symbols
Automatic reverse
flash alternately
if paper jams
H. Control Panel and LEDs
R 2. Reverse
Overload protection.
Machine stops to cool
down- approx. 10-15
minutes. Symbols
flash alternately
Paper shred size:
p
Paper entry width
...........................................................10.25"/260mm
*8.5"x11", 20lb., (75g) paper at 120V, 60 Hz, 8Amps; heavier paper,
humidity or other than rated voltage may reduce capacity.
• This shredder has a Disconnect Power Switch (C) that must
be in the ON (I) position to operate shredder. In case of an
emergency move switch to OFF (O) position. This action will
stop shredder immediately.
• Avoid touching exposed cutting blades under shredder head.
• Do not put foreign objects in paper entry.
• Shredder must be plugged into a properly grounded wall
outlet or socket of the voltage and amperage designated on
the label. The grounded outlet or socket must be installed
near the equipment and easily accessible. Energy converters,
transformers, or extension cords should not be used with
this product.
• FIRE HAZARD – Do NOT shred greeting cards with sound chips
or batteries.
• For indoor use only.
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLI H H H H SH SH SH
ENGLISH
ENGLISH
ENGLISH
NGLISH
NGLISH
NGLISH
NGLISH
GLISH
GLISH
GLISH
GLISH
LISH
LISH ISH
LISH
Models 2326S/2326C
326S/2326C
1. ON/OFF
3. Bin full
4. Door open
5. Safety Flap Open

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Powershred 2326c

Tabla de contenido