Description of the washing
machine
Control panel
GB
ON/OFF
button
WASH CYCLE
ON/OFF button
chine on or off. The START/PAUSE indicator light, which
flashes slowly in a green colour shows that the machine is
switched on. To switch off the washing machine during the
wash cycle, press and hold the button for approximately 2
seconds; if the button is pressed briefly or accidentally the
machine will not switch off. If the machine is switched off
during a wash cycle, this wash cycle will be cancelled.
WASH CYCLE knob: used to set the desired wash cycle
(see "Table of wash cycles").
OPTION buttons with indicator light: used to select the
available options. The indicator light corresponding to the
selected option will remain lit.
SPIN button
: press to reduce or completely exclude
the spin cycle - the value is indicated on the display.
TEMPERATURE button
pletely exclude the temperature: the value will be shown on
the display.
DELAYED START button
time for the selected wash cycle. The delay time will be
shown on the display.
6
TEMPERATURE
Button
knob
: press this briefly to switch the ma-
: press to decrease or com-
: press to set a delayed start
OPTION
buttons with
indicator lights
DISPLAY
SPIN SPEED
Button
START/PAUSE button with indicator light: when the gre-
en indicator light flashes slowly, press the button to start a
wash cycle. Once the cycle has begun the indicator light
will remain lit in a fixed manner. To pause the wash cycle,
press the button again; the indicator light will flash in an
orange colour. If the symbol
may be opened. To start the wash cycle from the point at
which it was interrupted, press the button again.
Standby mode
This washing machine, in compliance with new energy sa-
ving regulations, is fitted with an automatic standby system
which is enabled after about 30 minutes if no activity is
detected. Press the ON-OFF button briefly and wait for the
machine to start up again.
START/PAUSE
button with indicator light
DELAYED
START
Button
is not illuminated, the door