Technical Data - Niko 10-556 Manual Del Usuario

10-556/10-560/10-586
Problem
There is a call but no
ring tone. The red LED
lights.
You cannot switch
on the light at the
external unit via
The door automati-
cally opens when you
receive a call. A green
LED lights.
The red LED blinks
5 times during the
conversation or when
activating the camera.
You cannot retrieve
the camera image or
make a call. The red
LED blinks 3 times.
The image on the
video internal unit is
not clear.

Technical data

Dimensions 10-556/10-586
Dimensions 10-560
Permissible ambient temperature
Material
Display 10-556 / 10-586
Display 10-586
Display size
User manual - Video internal unit
Cause
The ring tone has been deacti-
vated.
The installer has assigned another
function to this function key.
.
No lighting system is installed.
The 'ring-and-come-in' function is
activated.
You are occupying the system
while someone is trying to make
a call.
The video or voice channel is busy. Press
The image settings on the video
internal unit need readjustment.
H162 x W226 x D75mm
H162 x W226 x D53mm
0° to 40°C
ABS
bent b/w CRT display
TFT color display
4 inch diagonal
Remedy
Press to reactivate the ring tone.
Contact your installer if you want to
modify the function of this function
key.
Contact your installer if you want to
modify the function of this function
key.
Press to deactivate the function.
End the conversation or stop going
through the images so the system is
available again.
to reactivate the video
channel.
Press to reactivate the voice
channel.
Adjust the brightness of the image
using the rotary keys at the bottom
of the unit. If this does not help,
contact your installer.
EN
23