Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
REMOVE THE HARDWARE PACK AND ALL LOOSE PARTS FROM THE CARTON AND VERIFY THAT ALL THE PARTS
AND FASTERNERS SHOWN ON THE LAST PAGE ARE INCLUDED.
ASSEMBLY OF SWEEPER
Note: Right hand (R.H.) and left hand (L.H.) are determined from the operators' position while seated on the Tractor.
1. (Figure 1) Assemble the angle bracket to the sweeper housing using a M8x16 hex bolt and a M8 hex lock nut. Make
sure the bracket is turned as shown and aligned straight with the housing and then tighten.
3. (Figure 2) Assemble the R.H Hitch Tube to the sweeper housing using M6x35 Hex Bolt and M6 Lock Nut. Do not tighten
yet. Repeat for the L.H hitch tube.
M6X40
HEX BOLT
M8 HEX
LOCK NUT
ANGLE
BRACKET
M8X16
HEX BOLT
M6 HEX
LOCK NUT
1
2
UK
5
Publicidad
