Publicidad
Idiomas disponibles
Idiomas disponibles
4. (Figure 3) Fasten the hitch tubes together using two M8x65 Hex Bolts and M8 Lock Nuts. Do not tighten yet.
UK
If your tractor hitch has 279 to 330 ground clearance refer to figure 4. If your tractor hitch has 203 to 279 ground clearance
refer to figure 5.
5. (Figure 4 or 5) Assemble the hitch brackets to the hitch tubes using two M8x50 hex bolts and M8 hex lock nuts. The
bolts should straddle the front hitch tube bolt. Do not tighten yet.
6. At this time tighten the four bolts fastening the hitch tubes to the sweeper housing. Next, tighten the two bolts fasten-
ing the ends of the hitch tubes together. Finally, tighten the two bolts fastening the hitch brackets to the hitch tubes.
7. (Figure 4 or 5) Assemble the hitch pin, spacers and the hair cotter pin to the hitch brackets.
HITCHPIN
HITCH BRACKET
SPACER
HITCH BRACKET
(STRAIGHT)
Ø 3 HAIR
COTTER PIN
6
M8X65
HEX BOLT
M8 HEX
LOCK NUT
4
M8X50
HEX BOLT
M8 HEX
LOCK NUT
3
M8X50
HEX BOLT
HITCHPIN
HITCH BRACKET
(STRAIGHT)
SPACER
M8 HEX
HITCH BRACKET
LOCK NUT
Ø 3 HAIR
COTTER PIN
5
Publicidad
