Instructions For Assembly; List Of Spare Parts - Kettler Satura P Manual Del Usuario

The equipment is dependent of revolutions per minute.
■
A slight production of noise at the bearing of the centrifugal mass
■
is due to the construction and has no negative effect upon ope-

Instructions for Assembly

Ensure that you have received all the parts required (see check
■
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.
Before assembling the equipment, study the drawings carefully
■
and carry out the operations in the order shown by the diagrams.
The correct sequence is given in capital letters.
Please note that there is always a danger of injury when working
■
with tools or doing manual work. Therefore please be careful when
assembling this machine.
Ensure that your working area is free of possible sources of
■
danger, for example don't leave any tools lying around. Always
dispose packaging material in such a way that it may not cause
any danger. There is always a risk of suffocation if children play
with plastic bags!
The equipment must be assembled with due care by an adult
■
List of spare parts page 25-27
When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the product
(see handling).
Example order: Art. no. 07653-000 / spare-part no. 10111038 /
2 pieces / S/N ....................
Please keep original packaging of this article, so that it may be used
for transport at a later date, if necessary.
Goods may only be returned after prior arrangement and in (internal)
packaging, which is safe for transportation, in the original box if
possible.
It is important to provide a detailed defect description / damage
report!
Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this should
be clearly stated on the order by adding the words „with fastening
ration. Possibly occurring noise during reverse pedalling result from
engineering and are absolutely safe.
The crosstrainer has a magnetic brake system.
■
person. If in doubt call upon the help of a second person, if pos-
sible technically talented.
The fastening material required for each assembly step is shown
■
in the diagram inset. Use the fastening material exactly as
instructed. The required tools are supplied with the equipment.
Bolt all the parts together loosely at first, and check that they have
■
been assembled correctly. Tighten the locknuts by hand until resi-
stance is felt, then use spanner to finally tighten nuts completely against
resistance (locking device). Then check that all screw connections have
been tightened firmly. Attention! once locknuts have been unscrewed
they no longer function correctly (the locking device is dest-
royed), and must be replaced.
For technical reasons, we reserve the right to carry out preliminary
■
assembly work (e.g. addition of tubing plugs).
material".
Waste Disposal
KETTLER products are recyclable. At the end of its useful life please
dispose of this article correctly and safely (local refuse sites).
KETTLER (GB) Ltd.
Merse Road · North Moons Moat · Redditch, Worcestershire B98 9HL · Great
Britain
http://www.kettler.co.uk
KETTLER International Inc.
1355 London Bridge Road · VA 23453 Virginia Beach USA
http://www.kettlerusa.com
english
5