Assemble The High Chair - Evenflo Modern Manual De Usario

ASSEMBLE THE HIGH CHAIR

1
B
C
A
2
E
F
D
3
G
H
D
4
D
2
To protect flooring, place a protective covering
(cardboard, towel, small rug or blanket) beneath the high
chair during assembly.
Place the seat base A facing down on a flat surface. Slide
the footrest tube into the seat bottom, as shown.
B
Secure footrest with two 1.75" (45 mm) screws C . Do not
overtighten.
Place the seat assembly D on its side, as shown.
With the "butterfly" logo facing upward, insert one leg
assembly through the left height adjuster .
E F
Turn over the seat assembly , placing it on its other side,
D
as shown.
With the "butterfly" logo facing upward, insert the other leg
assembly G through the right height adjuster H .
Place the seat assembly D upside down, as shown.
5
I
J
J
6
K
L
L
ASSEMBLE THE HIGH CHAIR
Install the H-frame onto the rear legs , as shown.
I J
Make sure the H-frame locks into both rear legs with audible
clicks on each side.
Pull on the H-frame to make sure it is attached securely.
I
Install the front base onto the front legs , as shown.
K L
Make sure the front base locks into both front legs with an
audible click on each side.
Pull on the front base to make sure it is attached securely.
K
3