Installing The Handle; Connecting The Hoses - Home Depot GLACIER BAY 461-3001 Guía De Uso Y Mantenimiento

Installation (continued)
7

Installing the handle

□
Place the handle (H) onto the inverter (1). Place
the set screw (I) into handle (H) and tighten set
screw (I) with the Hex wrench (Hex: 2.5mm, J).
Insert the index (K).
□
Place the other handle onto the left (hot) valve
and install the same way.
9
Making the water supply
connections
□
Connect the water supply lines (1) to the
faucet inlets (2). (Supply lines are not
included.)
8
□
□
□
H
I
J
K
1
L
6

Connecting the hoses

Connect the hoses (R) to the bottom of the hot
and cold end valves (M & N), as shown.
Align the middle body (D) in a position that will
allow maximum clearance to connect the
hoses (R).
Carefully bend the hoses (R) to t in the
available space, and carefully thread the hose
(R) couplings onto the sides of the middle
body (D). Tighten all connections with a wrench.
M
D
R
R
2
1
N