Maintenance And Storage - Beurer MG 148 Instrucciones Para El Uso

• The Shiatsu massage belt features overheating protection with an automatic switch-off fixture if
the device overheats. In such cases, let the Shiatsu massage belt cool down for 30 minutes before
recommencing use.
Massage variations
Neck massage:
• Place the Shiatsu massage belt on your neck.
• Set the contact pressure to your preferred setting
using the handle.
Back massage (shoulder blade):
• Place the Shiatsu massage belt diagonally around
your left or right shoulder as shown.
• Remove the right handle and feed the straps
through the holder.
• Close the hook and loop fastener.

8. Maintenance and storage

Cleaning
WARNING
• Always unplug the mains part from the socket and disconnect it from the device before carrying out
any cleaning.
• Clean the device using only the methods specified. Under no circumstances may liquid enter the
device or the accessory.
• Small marks can be removed using a cloth or damp sponge, and some liquid delicate laundry
detergent where necessary. Do not use any solvent-based cleaning products.
• Do not use the device again until it is completely dry.
Storage
If you do not plan to use the device for a long period of time, we recommend that you store it in the original
packing in a dry environment, ensuring it is not weighed down by additional items.
Back massage (upper back area):
• Place the Shiatsu massage belt around your upper
back area.
• Set the contact pressure to your preferred setting
using the handle.
Back massage (lower back area):
• Place the Shiatsu massage belt around your hips
as shown.
• Remove the handle on the right, feed the straps
through the holder and close the hook and loop
fastener.
12