SunWare FOX-MD1 Manual De Instalación página 12

2 |
Description
FOX-MD1
Thank you for purchasing the FOX-MD1. Soon after the easy
installation you will not want to be without the large illuminated display
showing all the information about your solar installation.
The FOX-MD1 is a remote display for various FOX units.
The remote display is easily connected to the FOX unit using the
assembled cable.
Due to the large backlit display data can be easily read even in dark
environments. If no key is pressed for 10 sec., the backlight switches
off automatically.
Depending on the unit connected, the FOX-MD1 will display different
data. Parameter values and functional settings can also be changed
for the specific device connected.
The FOX-MD1 can be used as built-in or surface mounted unit.
Therefore, a mounting frame is included with every FOX-MD1.
Only connect the FOX-MD1 to specially developed FOX units which are
specified below:
·
Charge controller FOX-220 version 1.0 to 4.5
·
Charge controller FOX-320 version 1.0 to 4.5
If the version number of the connected FOX unit is higher than the one
of the FOX-MD1, it is possible that not all the functions of the unit are
supported.
11