Further Information; Warranty Information - Axis M1145 Serie Manual Del Usuario

AXIS M1145 Series
2.
3.
4.
5.
It is also possible to reset parameters to factory default via the web
interface. Go to Setup > System Options > Maintenance.

Further Information

The User Manual is available at www.axis.com
Visit www.axis.com/techsup to check if there is updated firmware available
for your network product. To see the currently installed firmware version,
go to Setup > About.
Visit Axis learning center www.axis.com/academy for useful trainings,
webinars, tutorials and guides.

Warranty Information

For information about Axis' product warranty and thereto related
information, see www.axis.com/warranty/
Press and hold the control button and reconnect power. See
Hardware Overview, on page 10.
Keep the control button pressed for about 15–30 seconds until
the status LED indicator flashes amber.
Release the control button. The process is complete when the
status LED indicator turns green. The product has been reset to
the factory default settings. If no DHCP server is available on
the network, the default IP address is
Using the installation and management software tools, assign
an IP address, set the password, and access the video stream.
192.168.0.90
19