Everbilt DPJC125 Guía De Uso Y Cuidado página 7

Installation (continued)
7. While holding the pipes SECURELY, fill them with water to make sure that the connections and check valve do not
leak (See Figure 11). The pipes should hold water. If they leak, remove the pipes and find the leak. Remake the
leaking joint with teflon tape or retighten the clamp. Repeat the installation and the fill-check until the pipes do
not leak.
8.Install adapters in the elbows and connect the horizontal offset piping to the pump. Connect the horizontal pipe as
needed. Teflon tape all threaded joints to prevent leaks!
9.See your pump owner's manual for pump priming and operation instructions.
For warranty registration please go to www.gppumpsus.com
Figure 11
7
Please contact 1-844-241-5521 for further assistance.
HOMEDEPOT.COM