Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
6. Installation of Fan.
Tip: Seek the help of another person to hold the
stepladder in place and to help lift the fan up to
you once you are set on the ladder.
Remove set screw at bottom of fan assembly. With
the wall bracket secured to the wall and able to
support the fan, you are now ready to hang the
fan.
Connect 9-wire plug from inside of fan assembly
to 9-wire plug from wall. Be sure molex
connections snap together securely.
Grab the fan firmly with two hands. Align the 4
slots in the middle of the back of the fan assembly
with the 4 hooks on the wall bracket and then pull
down firmly on fan assembly.
WARNING: Make sure that all 4 hooks on the wall
bracket have engaged completely with the 4 slots
in the fan assembly and that the fan assembly is
stable.
Replace set screw at bottom of wall bracket--be
sure to securely tighten set screw.
7. Wall Control Operation.
0 - turns fan OFF
1 - turns fan to LOW speed
2 - turns fan to MEDIUM speed
3 - turns fan to HIGH speed
ON - turns oscillation ON
OFF - turns oscillation OFF
fan assembly
slots
set screw
page 6
wall
hooks
bracket
molex
connections
Publicidad
Capítulos
Tabla de contenido
