Playback From A Bluetooth Device - FeinTech AVS00200 Manual Del Usario

Device front
1. Mode Bluetooth receiver, e.g. to transfer music from the smartphone to the optical audio output
2. Mode Bluetooth receiver, e.g. for playback from the smartphone via the speakers
3. Mode Bluetooth transmitter, e.g. for playback from memory card or audio input to a Bluetooth headphone
4. Mode Bluetooth transmitter e.g. for playback from the optical audio input to a Bluetooth speaker
5. RX (receiver mode) lights up when Bluetooth reception is activated
6. PR (pairing mode) flashes when Bluetooth pairing is active. Lights constantly when the device is paired.
7. TX (transmitter mode) lights up when the Bluetooth transmitter is activated
8. Volume control and on / off switch, turn counterclockwise to turn it off until it clicks
Connection
Make sure that the volume control  is in the OFF position. Connect your speaker boxes to the 4 sockets by using banana
plugs or spade lugs on the cable. Then insert the DC jack of the power supply into the amplifier  and then plug it into the
mains socket.

Playback from a Bluetooth device

First, the device must be paired with this amplifier. Set the MODE switch to the position  and turn on the AVS00200. The
pairing lamp  starts flashing. Activate the pairing function on your Bluetooth device (usually found under „Settings> Blue-
tooth"). Now connect your device to the found FeinTech_AVS. The two LEDs RX  and PR  then light up constantly. Then start
playback on the paired device (smartphone).
Note 1: You can change the volume on both your smartphone and AVS00200. For optimum sound, the volume on the smart-
phone should be set high.
Note 2: Many devices are able to store the pairing information so that no repeated pairing is required.
Note 3: On output  the music is also available. An additional audio device can be connected there, e.g. a subwoofer.
Playing from a memory card
Insert a microSD memory card (T/F card) with audio files (like MP3) into the slot . Then set the MODE switch to T/F , turn
on the AVS00200 and playback starts. The order of the music tracks can not be changed on the AVS00200. The sound can be
output on all outlets (Bluetooth transmitter, speakers or audio outputs). Upon successful coupling with a Bluetooth receiver, e.g.
BT headphone, the PR and TX  LEDs light up continuously. Speakers are muted if connected.
6