Braun Oral-B Oxy Jet 3D Center Manual Del Usuario página 7

Using the 3D pulsating toothbrush
Connecting and charging
Plug the appliance into an electrical outlet. Place the handle
on the charging base
A full charge will take 16 hours and will provide 45 minutes
operation time. For everyday use, the handle can be stored
on the charging base to maintain it at full power. Overcharging
is impossible.
Battery maintenance
To maintain the maximum capacity of the rechargeable
battery, the following procedure should be done every 6
months: Do not place the handle back onto the charging base
in order to discharge it by regular use. Once discharged,
recharge the handle on the charging base.
Operating the switch
4
Press the switch to operate the toothbrush.
Your toothbrush features a reduced speed setting for sensitive
areas of the mouth:
• press the switch to operate with normal speed,
• press a second time to operate with reduced speed,
• press a third time to switch the handle off.
Removing plaque
The toothbrush can be used with any leading brand of
toothpaste.
To avoid splashing, guide the brushhead to your teeth before
switching the handle on.
Guide the brushhead from tooth to tooth, following the curve
of the gum and the shape of each tooth. Hold the brushhead
in place for a few seconds before moving on to the next tooth.
Brush the gums as well as the teeth. Do not press too hard nor
scrub – simply let the brush do all the work.
During the first few days of using the toothbrush, your gums
may bleed slightly. In general, bleeding should stop after a few
days. Should it persist after 2 weeks, please consult your
dentist or hygienist.
1
, the charge indicator will light up.
3
1x
on
+1x
+1x
off
7