Braun Oral-B Oxy Jet 3D Center Manual Del Usuario página 8

Pressure Sensor
For safety and optimum brushing results, the toothbrush
has a pressure control system: If too much pressure is
applied, the oscillating movement of the brushhead will
continue, but the pulsation will stop. There is a noticeable
change in feeling and sound when the pressure sensor is
activated.
Memory timer
An incorporated timer memorises the elapsed brushing
time, even when the handle is briefly switched off (max.
30 seconds). After two minutes – which is the minimum
recommended brushing time – the timer signals by a short
stutter.
®
INDICATOR brushhead
Dentists recommend that you replace any toothbrush every
3 months, since worn bristles do not remove plaque as
effectively as new ones. Therefore, the brushhead is provided
with INDICATOR bristles. With proper brushing twice a day
for two minutes using toothpaste, the color will disappear
half-way down the bristles in a 3-month period.
After use
Rinse the brushhead thoroughly under running water for
several seconds with the handle switched on. Switch off
the handle and take off the brushhead. Clean both parts
separately under running water, then wipe them dry.
The environment
For environment reasons, your toothbrush uses a
«environmentally sound» nickel-hydride rechargeable battery.
The battery does not contain any poisonous heavy metals that
can damage the environment.
In the interest of recycling, please do not dispose of this
appliance in the household waste at the end of its useful life.
Instead dispose of it at an authorized Braun Service Center or
at an appropriate collection site.
8