Descargar Imprimir esta página

Cadet BTF Serie Instrucciones Para La Instalación página 4

Ocultar thumbs Ver también para BTF Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

The heater and thermostat must be properly installed before they are used.
STEP 1
Turn the power back on at the
circuit breaker or fuse box.
WARRANTY
Warranties are non transferable and apply to original consumer only.
Warranty terms are set out below.
LIMITED ONE-YEAR WARRANTY: Cadet will repair or replace any Cadet
product, including thermostats, found to be defective within one year
after the date of purchase.
THESE WARRANTIES DO NOT APPLY:
1. Damage occurs to the product through improper installation or
incorrect supply voltage;
2. Damage occurs to the product through improper maintenance, misuse,
abuse, accident, or alteration;
3. The product is serviced by anyone other than Cadet;
4. If the date of manufacture of the product cannot be determined;
5. If the product is damaged during shipping through no fault of Cadet.
6. CADET'S WARRANTY IS LIMITED TO REPAIR OR REPLACEMENT AS
SET OUT HEREIN. CADET SHALL NOT BE LIABLE FOR DAMAGES
SUCH AS PROPERTY DAMAGE OR FOR CONSEQUENTIAL DAMAGES
AND/OR INCIDENTAL EXPENSES RESULTING FROM BREACH OF
THESE WRITTEN WARRANTIES OR ANY EXPRESS OR IMPLIED WARRANTY.
7. IN THE EVENT CADET ELECTS TO REPLACE ANY PART OF YOUR CADET
PRODUCT, THE REPLACEMENT PARTS ARE SUBJECT TO THE SAME
WARRANTIES AS THE PRODUCT. THE INSTALLATION OF REPLACEMENT
PARTS DOES NOT MODIFY OR EXTEND THE UNDERLYING WARRANTIES.
REPLACEMENT OR REPAIR OF ANY CADET PRODUCT OR PART DOES
NOT CREATE ANY NEW WARRANTIES.
operaTIng InSTrucTIonS
STEP 2
Turn the thermostat knob fully
clockwise. When the room
reaches comfort level, turn
the knob counterclockwise
until a slight click is heard.
The heater will now cycle
around this preset temperature.
WarranTy
STEP 2B - Tamper
Proof Models
Remove plastic plug and adjust
the thermostat shaft to desired
setting using a screwdriver.
Replace the plastic plug. The
heater will now cycle around
this preset temperature.
8. These warranties give you specific legal rights, and you may also
have other rights which vary from state to state. Cadet neither assumes,
nor authorizes anyone to assume for it, any other obligation or liability
in connection with its products other than as set out herein.
If you believe your Cadet product is defective, please contact Cadet
Manufacturing Co. at 360-693-2505, during the warranty period, for
instructions on how to have the repair or replacement processed. Warranty
claims made after the warranty period has expired will be denied.
Products returned without authorization will be refused.
Parts and Service
Visit http://support.cadetco.com for information on where to obtain
parts and service.
Reduce-Reuse-Recycle
This product is made primarily of recyclable materials. You can
reduce your carbon footprint by recycling this product at the
end of its useful life. Contact your local recycling support center
for further recycling instructions.
©2009 Cadet Manufacturing Co.
Printed in U.S.A. 09/11 #720107

Publicidad

loading

Este manual también es adecuado para:

Btf1Btf2Btf1tpBtf2tp