Backlight; Hold Function; Zero Configuration - Gram Precision DS Serie Manual De Utilización

UF-4 Backlight
Modes:
- Lit Off: Disable.
- Lit A: Automatic
- Lit on: Always activated.
Default value: Lit A (automatic)
1. Press the to access to backlight configuration.
2. Use the key to select the desired mode.
3. Press the key to confirm.
UF-5 HOLD function (keeps the reading fixed on display for few seconds after
removing the load from the platter)
Modes:
- HOLD 0 : Disable.
- HOLD 1 : Weighing animals mode.
- PCtXXX: To configurate the range from 001~100 in HOLD 1 mode.
- timEXX: To configurate the time from 1 2 4 8 16 32 64 in HOLD 1 mode
Default value: HOLD 0
1. Press the key to access to HOLD function configuration.
2. Use the key to select the desired mode.
3. Press the key to confirm.
UF-8 Zero configuration
ZP 0 Disable function.
ZP 1 1 division not displayed
ZP 2 2 divisions not displayed
ZP 3 3 divisions not displayed
ZP 4 4 divisions not displayed
ZP 5 5 divisions not displayed
• This function is locked if HOLD 1 function is activated.
Default value: ZP 0
8