Prepare The Hood - Broan Elite E661 Instrucciones De Instalación

3. PREPARE THE HOOD

3.1 Pull latch tabs and remove filters from the hood.
3.2 Remove both screws retaining each side panel and set aside.
3.3 Press on tabs and pull to disconnect light assemblies from electrical
harnesses.
Remove both panels and set aside.
3.4 Remove both transport bracket retaining screws. Discard the
transport bracket and one of its screw (set the second screw aside).
Do not reinstall the transport bracket.
3.5 Remove the 9 screws retaining the bottom panel to the hood and
set aside. Slide out the bottom panel and set aside.
NOTE: Wires not shown in illustration to ease understanding.
CAUTION
HD0107
HO0160
HO0157
HO0167
HO0159
- 5 -
S
CREW
L
OCATIONS
S
CREW
L
OCATIONS
T
RANSPORT
B
RACKET
S L
CREW OCATIONS