FUNCTION KEYS:
MODE: To select your specification mode and/or turn on computer.
SET:
To set a value of Time, Count, or Calories (when not in Scan mode).
RESET: Press to reset Time, Count, or Calories. Press and hold for about 3
seconds to reset all values, expect Total Count.
FUNCTIONS AND OPERATIONS:
AUTO ON/OFF: The power will turn off automatically once there is no signal for 4 minutes. The
computer will reactivate once the machine is put into motion or when a
computerbutton is pressed.
SCAN:
Press MODE button until SCAN appears. The computer will rotate through the
four functions in the following order: TIME, COUNT, TOTAL COUNT,
andCALORIES.Each function will be held for 6 seconds.
TIME:
Counts the total time elapsed during your current workout.
COUNT:
Counts the number of rowing strokes from your current workout.
TOTAL COUNT: Counts the total amount of strokes from the first use.
CAL:
Counts the total calories burned from current workout.
COUNTDOWN:
You can set the value of Time, Count or Calories to countdown.
1. Press MODE to select a function. Make sure you are not in SCAN mode.
2. Press SET to select a value you want. You can press RESET to clear the value.
3. When the display stops flashing, start rowing and the machine will start to countdown.
BATTERY: This computer uses two AAA batteries. If the display appears incorrectly or becomes
difficult to read, please install new batteries. Always change both batteries at the same time. Do not
mix battery types and do not mix old and new batteries. Disposebatteries according to your state
and regional guidelines.
SPECIFICATIONS:
FUNCTIONS
TOTAL COUNT
BATTERY TYPE
OPERATING TEMPERATURE
STORAGE TEMPERATURE
EXERCISE COMPUTER
SCAN
TIME
0:00~99:59 (Minute: Second)
COUNT
CALORIES
Every 6 seconds
0~9999 Count
0.0~9999 Kcal
0~9999 Count
(2) Two AAA or UM-4
0°C ~ 40°C
-10°C ~ 60°C
14
Version 6.4