Spypoint LINK-S-DARK Guía De Instalación Rápida página 4

PREPARATION
RECHARGING THE INTERNAL LITHIUM
BATTERY
• Turn the camera OFF.
• Turn the solar panel downwards so
that it does not interfere with the
charging process via the 12V-USB
cable.
• Plug the 12V-USB cable (included) into
the 12 V jack on the bottom of the
unit, then connect the other end to a
5 V wall outlet charger (not included).
• Charge the camera for 24 to 48 hours
before use.
NOTE
• Once the camera is plugged in, its screen will light up and
the battery charge level will be displayed for 10 seconds.
• You can press the OK button at any time during the charging
process to display the battery charge level.
MANAGE DIFFERENT CAMERA POWER SOURCES
1. The main power source of your camera is the internal
lithium battery.
• The solar panel's function is to recharge the internal
battery.
4