Using Your Drink Mixer; Drink Mixer Tips - Hamilton Beach Professional 65120 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Using Your Drink Mixer

1. Set control switch to
(OFF).
Plug into outlet. Place
ingredients to be mixed
in container.

Drink Mixer Tips

• The drink mixer is great for mixing protein drinks.
• All syrups and powdered mixes should be added just before mixing to
prevent them from sinking to the bottom of the container.
• Most drinks can be mixed in less than 2 minutes.
• Whole fruit should not be used when making fruit drinks. Mash or
puree fruit; add to drink, and mix.
• The container must always be filled to at least the minimum level
mark or the liquid will not reach the mixing shaft. Do not fill above
maximum level mark (12 ounces/355 ml) or liquid may overflow while
mixing.
2. Place container onto drink
mixer, making certain the
container's top edge is
behind container support
and container bottom is on
container rest.
3. Move control switch to desired
speed to process. Start with LOW
( ) speed; then increase to HIGH
( ) speed if desired. For hard
ice cream or very thick shakes,
remove the container from the
rest and support. With mixing
shaft still submerged in mixture,
move the container around for
more thorough mixing.
• For best results, all liquid ingredients should be as cold as possible.
Milk drinks will taste best if milk is ice cold. The colder the milk, the
thicker and more frothy the drink.
• All syrups and powdered mixes should be added just before mixing to
prevent them from sinking to the bottom of the container.
• The drink mixer does not crush ice. For best results, use crushed ice if
the recipe calls for ice.
4. When finished, turn unit to
(OFF) and tilt head up.
Remove container, pour
contents from container, and
serve.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido