Polk Audio n1 surroundbar Manual De Instrucciones página 13

What if my provided optical cable is too short?
•
We did our best to provide a cable of
adequate length; however, there might
be a few setup instances in which the
cable may be too short. If that is your
situation, your local electronics store
will have cables that meet your
required length.
My audio sounds strange and distorted.
•
Your N1 SurroundBar requires a clean,
unaltered stereo signal for proper audio
performance. If the sound from your
N1 SurroundBar is strange or distorted, then
check the audio menus of whatever source(s)
are connected to your SurroundBar and make
sure any audio processing is turned off. Make
sure you've selected the appropriate mode
for your program material (Halo Warrior,
Forza Racer, Cinema, Music).
Why can't I successfully program
the N1 SurroundBar to respond
to my remote control?
•
There are many remote control formats,
and we have done our best to make the
N1 SurroundBar compatible with the
most popular brands. However, there
are likely some cases in which the bar
will not be able to learn your remote codes.
•
In this case, please use the remote control
provided with the N1 SurroundBar product
or try a different universal remote control.
Note: RF only remotes will not work
with this system.
How do I control the N1 SurroundBar?
There are three ways to control your
N1 SurroundBar:
•
Use the buttons on the front of the bar.
•
Use the provided remote control.
•
Program the N1 SurroundBar to
respond to your existing remote
(see included instructions).
Polk Customer Service 800-377-7655 (Outside USA & Canada: 410-358-3600)
14
My N1 SurroundBar was responding to com-
mands, but now it isn't. What should I do?
•
In this rare event, simply disconnect the power
cord from the AC outlet, wait a few seconds,
plug the cord in and then turn the power
back on. This should restore control.
How do I erase previously learned remote
control commands?
•
If you have programmed your SurroundBar
to respond to a remote control and you no
longer want it to do so, then you can erase
the codes by pressing the LEARN key for
about two seconds while the unit is in standby
mode (power LED is red). The N1 Surround-
Bar will continue to respond to the provided
credit card remote control.
To contact Customer Service/
Technical Support:
•
If you have a question or comment, please
feel free to call us or email us. In North
America and Canada, call Polk Customer
Service: 800-377-7655 (M-F 9-5:30 EST)
or via email polkcs@polkaudio.com.
Outside the US, call 410-358-3600.
Polk is a DEI Holdings, Inc. Company. Polk, SDA Surround and
SurroundBar are registered trademarks of Polk Audio, Inc. N1
SurroundBar and SmartBar are trademarks of Polk Audio, Inc.
All other trademarks are the property of their respective owners.
© 2013 Microsoft Corporation. All Rights Reserved. Microsoft, 343
Industries, the 343 Industries logo, Halo, the Halo logo, Turn 10, the
Turn 10 logo, Forza Motorsport, the Forza Motorsport logo, Xbox, Xbox
360, Xbox One, and the Xbox logos, are trademarks of the Microsoft
group of companies.
Products that have earned the Energy Star
the environment through superior energy efficiency.
Manufactured under licence from Dolby Laboratories. Dolby and the
double-D symbol are registered trademarks of Dolby Laboratories.
The Bluetooth word mark and logos are registered trademarks
®
owned by Bluetooth SIG, Inc. and any use of such marks by Polk
is under license. Other trademarks and trade names are those
of their respective owners.
The "aptX software is copyright CSR plc or its group companies.
®
All rights reserved. The aptX
®
of CSR plc or one of its group companies and may be registered
in one or more jurisdictions."
is a trademark of SRS Labs, Inc. TruSurround HD
technology is incorporated under license form SRS Labs, Inc.
are designed to protect
®
mark and the aptX logo are trademarks