Bluetooth ® Wireless Technology - Polk Audio n1 surroundbar Manual De Instrucciones

Bluetooth Wireless Technology
®
To use your Bluetooth wireless technology device
with the SurroundBar, you must first pair your
device with your SurroundBar. Pairing creates the
ability of your Bluetooth device to connect with
your SurroundBar wirelessly. Pairing is like a hand-
shake between your Bluetooth device and your
SurroundBar in which they meet and exchange
information.
You only have to pair your SurroundBar with your
Bluetooth device one time for this exchange of
information to take place. After that you simply
select the "polk n1" from your device list
to make the connection to your SurroundBar.
The SurroundBar can hold 8 Bluetooth devices in
its memory. If enough devices pair after yours, your
device could be dropped from the memory list.
Pair and connect your Bluetooth device
with the SurroundBar:
1. Make sure your Bluetooth device and
SurroundBar are both powered on.
2. Activate the Bluetooth function on your
Bluetooth source device. See your device's
manual for instructions.
3. Press the Bluetooth source button from the
SurroundBar remote.
The Bluetooth LED will illuminate, then begin
slowly pulsing as it looks for a device to pair with.
4. Your SurroundBar will now be displayed on
your source device and available to pair and/
or connect. Select the "polk n1" on your
device to initiate the connection process.
5. After a short delay (5 seconds), the two de-
vices should now be connected. You should
hear a short tone and the Bluetooth source
LED will now be steady blue.
6. Play your music from your device!
Note: If your device asks for a passcode to pair
to the SurroundBar, enter "0000."
Polk Customer Service 800-377-7655 (Outside USA & Canada: 410-358-3600)
10
How to disconnect with a Bluetooth device:
1. Press and release the remote control
Bluetooth button, or
2. Press and release the Bluetooth source
button, or
3. Turn off or disconnect the Bluetooth feature
on your Bluetooth device.
The SurroundBar will emit a short tone and the
Bluetooth source symbol will begin slowly pulsing
when disconnected.
Automatic connection:
Any time you want to connect the last connected
device and play it through the SurroundBar,
do the following:
1. Turn your device's Bluetooth function on.
2. Enter Bluetooth source by pressing the Blue-
tooth source button from the remote or press
the Bluetooth button on the SurroundBar.
3. After a short delay, the two devices will auto-
matically connect, you will hear a short tone,
and the Bluetooth source LED will now
be steady blue.
Note: By default, the last connected Bluetooth
device will automatically connect if available.
Pair and/or connect to a device when in Bluetooth
source, but disconnected:
1. Engage the Bluetooth function on your
Bluetooth source device. See your device's
manual for instructions.
a. The SurroundBar will be displayed on
your source device as available to pair
and connect. Select the "polk n1"
on your device to initiate the pairing and
connection process.
After a short delay, the two devices should now
be paired and connected. You should hear a short
tone and the Bluetooth source symbol will now
be steady blue.
How to disconnect:
Note: Anytime The SurroundBar exits SLEEP
mode and is in Bluetooth source, the SurroundBar
will automatically connect to the last connected
Bluetooth device if the paired device's Bluetooth
feature is on.