Tabla de contenido
Publicidad
Deluxe Trailer Breakaway Kit
INSTALLATION INSTRUCTIONS
This breakaway system is designed to activate the trailer's
electric brakes in the event that the trailer should disconnect
while under tow, bringing the trailer to a safe stop. Breakaway
systems are required when towing trailers rated at 3,000 lbs.
GVW or higher.
Note: Your trailer must be equipped with electric
trailer brakes to utilize this kit.
MOUNTING
1. Read instructions thoroughly before beginning.
2. Position the breakaway switch on the tongue of the trailer
in a position that allows the cable to reach the tow vehicle's
hitch safety chain eyelets. The switch must be mounted with
the plunger and wires facing
the rear of the trailer and the
cable facing the tow vehicle
(Fig 1).
Caution: The switch loca-
tion must allow for an
unobstructed line of pull
should the trailer and vehicle separate.
3. Drill a 9/32" Hole in the trailer frame, using the
switch as a template. Mount the breakaway switch to the trailer
using a 1/4" bolt and nylon locking nut (not provided).
Note: Do not over-tighten the bolt as the switch must
Fig. 1
Publicidad
Tabla de contenido
