Earbud Indicator Lamp - LG TONE FREE HBS-F110 Manual De Usuario

4 Select LG HBSF110 Master in the Bluetooth menu to connect the device.
5 Once the device is connected, you will hear a voice prompt on the connection status.
Note for Using Earbuds
1 The main (left) and sub (right) earbuds are automatically connected.
2 The connection between the earbuds is automatically cut if the device connected to the main
earbud is disconnected.
3 Refer to "HBS-F110 Pairing and Connecting" if the main earbud is disconnected.
4 If the sub earbud does not operate,
- check the battery charging status, or
- if the battery is sufficiently charged, connect the earbuds again by referring to "HBS-F110
Pairing and Connecting. "
5 If the earbuds have been properly plugged into the Neckband/Cradle, the earbuds' white
Indicator Lamp will flash.
6 Contact an LG Electronics Service Center if you lost an earbud.
Automatic Reconnection
If the earbuds are separated from the neckband or cradle, power is turned on, with the last connected
device automatically connected. (If a connected device is not found, it switches to Search mode.)
If the device is not automatically connected, manually connect using LG HBSF110 Master in the
device to be connected.

Earbud Indicator Lamp

HBS-F110 Status
Power on
Search Mode
When plugged into the
Neckband/Cradle
Operation
The white Indicator lamp will flash four times.
The white Indicator lamp is lighted.
The white Indicator Lamp flashes two times.
9