Function
Caller ID Notification
Troubleshooting
Problem
Power is not turned on
Cannot make a call with the
HBS-F110
HBS-F110 is not registered
in the mobile phone
The sound is low
Sub earbud is not operable
When the earbuds have
been disconnected from
each other
Button and Description
Android™ : Set caller ID notification to ON in the headset settings to receive
caller ID information via voice prompts from your earbuds.
iOS: This feature is supported on iOS v. 10.0 or above if set up in Settings >
Phone > Announce Calls.
Solution
Check the battery level and charge it.
If the mobile phone does not support the headset and hands-free
function, you cannot use the calling features. Check the battery level
and charge it.
Check whether HBS-F110 is turned on.
Check if the left main earbud of HBS-F110 is in Search mode.
Press and hold the MFB in the left main earbud for five seconds to switch
the earbuds to Connection mode.
Adjust the volume of the device connected to HBS-F110 or check the
headset volume in the Tone & Talk app.
Check the battery charging status.
If the battery is sufficiently charged, connect the earbuds again by
referring to "HBS-F110 Pairing and Connecting. "
Plug both earbuds into the cradle or neckband, and then remove
them again.
15