OPERATION _ _________________________
Straightening hair
Caution
The housing of the appliance
7
becomes very hot. Do not touch
the housing near the heating
element.
Place the appliance on a solid,
7
flat, heat resistant surface.
Do not place the appliance on
any soft or uneven surfaces such
as carpets, rugs or bedding and
never cover.
Make sure your hair is com-
7
pletely dry.
1 Plug the power cord
wall socket.
2 Switch the appliance on by push-
ing the On/Off switch
– The LED display
white.
3 Set the temperature by operating
the "+" and "-" buttons
– The LED display illuminates the
temperature when it is ready.
Notes
Adjust to the lowest temperature
7
the first time you use it.
Adjust the temperature (5 set-
7
tings) suitable for your type of
hair.
into the
G
.
F
lights up in
D
E
4 Comb or brush out a section
of your hair about 3 cm wide,
starting at the neck.
5 Guide the brush in a careful,
smooth movement away from the
head to the end of the section of
hair. Avoid making kinks in it
Caution
Do not touch the bristles as they
7
are very hot.
6 Hold the appliance in position
until the hair is heated.
– This takes a few seconds at the
most.
Notes
Repeat the procedure section by
7
section.
If you have thick hair, you might
7
have to repeat this procedure on
the same section several times.
Keep the strand of hair taut so
7
that no kinks form.
7 After use, switch the appliance
off by pushing the On/Off switch
. The LED display
F
Then unplug the power cord
Notes
Switches off automatically after
7
60 minutes
turns off.
D
.
G
ENGLISH 2 1