Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTION
Introduction
Please read through the manual carefully and thoroughly so that you will have a better
understanding of the performance and features of this clock radio.
DC Operation
This unit can be powered by DC adaptor 4.5V. Please always use original provided DC adaptor.
Connect two AAA battery (not included) to the battery compartment. It maintains the clock
continue function whenever the DC power is interrupted (the display will not exhibit time during
power failure but the clock will keep correct time).
Setting The Clock
1. Check the radio is switched off (standby mode).
2. Press TIME PROG for 3 seconds on the panel to start clock setting.
3. Press TUNING + or TUNING - button for 12-hours/24-hours selection.
4. Press TIME PROG on the front panel to hour setting.
5. To set the hours, press TUNING + or TUNING - while the display is still flashing.
6. Press TIME PROG on the front panel to minute setting.
7. To set the minutes, press TUNING + or TUNING - while the display is still flashing.
8. Press TIME PROG on the front panel to complete the clock setting.
Setting The Alarm
1. Check the radio is switched off (standby mode).
2. Press the AL1 / AL2 once to preview the alarm time.
3. Press AL1 / AL2 for 3 seconds on the panel to start alarm setting.
4. To set the hours, press TUNING + or TUNING - while the display is still flashing.
5. Press AL1 / AL2 on the panel to minute setting.
5. To set the minutes, press TUNING + or TUNING - while the display is still flashing.
6. Press AL1 / AL2 on the panel, and press TUNING + or TUNING - to select the alarm sound as Buzz
or Radio.
7. Press AL1 / AL2 on the front panel, and press TUNING + or TUNING - to select the volume of
alarm sound.
8. Press AL1 / AL2 on the front panel to complete the alarm setting.
Remark: Press AL1 / AL2 to enable / disable the alarm function. To make sure the alarm icon is
switch on if alarm function is in using. When the alarm rings, the volume of the alarm will gradually
increase.
When the alarm 1 or 2 rings, to turn it OFF, press on the AL1 / AL2. Alarm will ring again at the same
time the next days.
Publicidad
Tabla de contenido
