Sunstech FRD35U Manual De Instrucciones página 6

To stop completely alarm 1 or 2 the following days, press AL1 / AL2 in standby mode, the alarm 1 or
2 icon will disappear and alarm 1 or 2 will be disabled for the following days.
To resume alarm 1 or 2, press AL1 / AL2 again in standby mode.
Snooze Function
1. When your alarm rings, you can press the SNOOZE to temporarily suspend the alarm. The alarm
will ring again at 9 minutes later. (The Snooze interval time is 9 minutes).
2. Snooze will be repeated until the AL1 / AL2 is pressed.
Sleep Function
1. When listening to radio, press the SLEEP to select a time. For example, when the LED display
shows 15, the radio turns will turn off automatically after 15 minutes.
2. To select a longer playing time, press the SLEEP to select 15 / 30 / 45 / 60 / 75 / 90 minutes.
3. To turn off the radio at any time, press the POWER ON OFF.
Radio
1. Ensure that the FM antenna is completely unrolled and extended to have the best FM reception.
2. Press POWER ON OFF to switch on the radio.
3. Press and hold down TUNING + or TUNING – until the display frequency starts to run. When a
station of sufficient strength has been found, tuning stops.
4. Adjust the sound with VOLUME + or VOLUME –.
5. To switch off the radio, press POWER ON OFF once.
Presets
You can store the frequencies of up to 50 radio stations in the memory. A stored frequency can be
erased from the memory by storing another frequency in its place.
Automatic Preset
1. Press and hold down TIME PROG until the display frequency starts to run.
Manual Preset
1. Tune to your desired station.
2. Press TIME PROG once to enter programming mode.
3. Press TUNING + or TUNING – to select the desired memory location.
4. Press TIME PROG once again to confirm the selected station.
5. To listen to a preset station:
• select your waveband;
• press the TUNING + or TUNING – for selecting your desired station.