Two-Point Method; Coefficient Method - Selecta V-1100 Manual Del Usuario

MANUAL DE INSTRUCCIONES CODIGO 80250 REV B
J
.P. SELECTA s.a.u.
Ago/2016
6.3 Two-points Method
This method allows measuring a concentration from two pattern concentrations.
1) Choose «A» or «T» mode and the wavelength.
2) Insert the «blank» cuvette, press
3) Insert the «pattern» cuvette and press
4) Press
to confirm. (Fig. 4-7).
5) Repeat to insert the second pattern.
6) Set the unknown concentration sample in the cell holder, then its concentration
will display on the screen. (Fig.4-8).
7) Press
8) Repeat step 6) and 7) to test other samples.

6.4 Coefficient Method

1) Set the wavelength.
2) Press
3) Press
with
From now on, you can test the samples.
4) Press
(Fig. 4-10).
5) Set the samples in the cell holder. Its concentration will be displayed on the screen
automatically (Fig.4-11).
6) Press
Autovía A2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
(Sujetas a modificaciones sin previo aviso) Pag.: 18
or to input the standard concentration, and press
to print the test result.
to choose «F» Mode.
or to set the coefficient value of «K» and «B», followed
pressed to confirm. (Fig. 4-9).
to set 100%T transmittance or zero absorbance
to print the test result.
to get 100%T.
to choose «C» mode.
Tel 34 93 770 08 77 Fax 34 93 770 23 62