Maytag MGC4430BDB Manual De Instalación

Maytag MGC4430BDB Manual De Instalación

Superficies para cocinar de gas selladas 30” y 36”

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

INSTALLATION
MANUAL
IMPORTANT: Dimensions Shown in Both Inches and Centimeters.
IMPORTANT:
Be sure the appliance being installed is equipped for the gas to be supplied. Refer to serial plate on
underside of burner box for this information. Do not attempt to convert this appliance for use with a gas other than the type
specified.
30" MODEL
36" MODEL
IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE, MAINTENANCE
OR USE OF RANGE CAN RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE.
NOTICE TO CONSUMER: Retain these instructions for future reference.
SEALED GAS COOKTOPS
NOTICE TO INSTALLER: Leave these instructions with the appliance.
30" and 36"
SPECIAL WARNING:
DIMENSIONS
inches
A
28 1/2
+ 1/16
72.4 + 0.2
B
19 15/16 + 1/16
50.6 + 0.2
C
2 1/8
+ 1/16
5.4 + 0.2
D
5 1/4
+ 1/16
13.3 + 0.2
E
29 1/2
+ 1/16
74.9 + 0.2
F
21
+ 1/16
53.3 + 0.2
G 3 13/16 + 1/16
9.7 + 0.2
H
12 1/4
+ 1/16
31.1 + 0.2
DIMENSIONS
inches
A
34 1/2
+ 1/16
87.6 + 0.2
B
19 15/16 + 1/16
50.6 + 0.2
C
2 1/8
+ 1/16
5.4 + 0.2
D
5 1/4
+ 1/16
13.3 + 0.2
E
36
+ 1/16
91.4 + 0.2
F
21
+ 1/16
53.3 + 0.2
G 3 13/16 + 1/16
9.7 + 0.2
H
15 1/4
+ 1/16
38.7 + 0.2
CUTOUT DIMENSIONS
ARE CRITICAL
W10187822
cm
cm
(01-08-00)

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Maytag MGC4430BDB

  • Página 1 INSTALLATION SEALED GAS COOKTOPS MANUAL 30” and 36” IMPORTANT: Dimensions Shown in Both Inches and Centimeters. IMPORTANT: Be sure the appliance being installed is equipped for the gas to be supplied. Refer to serial plate on underside of burner box for this information. Do not attempt to convert this appliance for use with a gas other than the type specified.
  • Página 2 Location Of Your Appliance Installing Cabinetry Over Your Cooktop Locate this appliance away from combustible materials such as window curtains and combustible wall A = 30″ (76.2 cm) minimum decorations. vertical clearance between cooking surface Minimum horizontal clearance between the edge of the and construction above appliance and combustible construction extending from the appliance.
  • Página 3: Recreational Park Trailers

    LP gas. If approved, the following items are applicable: CAUTION: Warranty is void on Maytag equipment Mobile Homes installed other than as recommended by manufacturer. The installation of a range designed for mobile home...
  • Página 4 Connecting Appliance To Gas Supply A QUALIFIED SERVICE TECHNICIAN OR GAS ILLUSTRATIVE GAS SUPPLY PIPING APPLIANCE INSTALLER MUST MAKE THE GAS SUPPLY CONNECTION. Leak testing of the appliance shall be conducted by the installer according to the instructions given. Gas supply piping MUST conform to all local, municipal and state building codes and local utility regulations.
  • Página 5: Pressure Testing

    Alternative Piping Methods To Pressure Testing Connect Appliance To Gas Supply The appliance must be isolated from the gas supply piping system by closing its individual manual shut-off A TRAINED SERVICE TECHNICIAN OR GAS valve during any pressure testing of the gas supply piping APPLIANCE INSTALLER MUST MAKE THE GAS system at test pressures equal to or less than 1/2 pounds SUPPLY CONNECTION.
  • Página 6: Electrical Grounding Instructions

    Electrical Wiring Information This appliance is equipped with a grounded type power In planning any installation, note that the free length of cord. A grounded outlet must be provided. It is this appliance’s power cord, extending beyond a point recommended, for convenience, the outlet be located 3-3/4″...
  • Página 7 Converting Appliance For Use Installation Of LP Orifice Spud With LP Gas 0.91 0.91 0.91 WARNING Propane conversion is to be performed by a AUTHORIZED SERVICER (or other qualified agency) in accordance with the manufacturer’s instructions and all codes and requirements of the authority having jurisdiction.
  • Página 8 B. INVERT CAP IN APPLIANCE PRESSURE REGULATOR (See figure 10) With the appliance installed, the appliance regulator After adjusting the screw the burner should produce a should be located as shown in figures 3 or 4. stable, steady blue flame of minimum size. The setting should be checked by turning knob from high to low CONVERSION OF APPLIANCE several times without extinguishing the flame.
  • Página 9 To Convert Appliance For Use With 4 BURNER MODEL (30″ WIDE) Natural Gas 1.55 1.55 WARNING Electrical power and gas must be turned off prior to conversion. If this appliance has been converted for use with LP gas, each of the following modifications must be performed to convert the unit back to natural gas.
  • Página 10 Burner Performance CAUTION: shutters. When operating properly, burners should Never cover control knobs or surrounding produce clearly defined, even blue flames. If the flames control surface with utensils, towels, or other objects. have yellow tips or are hazy and otherwise appear to Never obstruct free air passage past the control knobs.
  • Página 11 Holding Unit Down To Countertop COUNTERTOP I M P O R T A N T To hold the cooktop to the counter top, two hold down brackets have been provided. Utilize the hold-down brackets, one on the left and one on the right side of unit to secure the unit to the counter top.
  • Página 12: Superficies Para Cocinar De Gas Selladas

    SUPERFICIES PARA COCINAR DE GAS SELLADAS MANUAL DE 30” y 36” INSTALACIÓN IMPORTANTE: Las dimensiones aparecen en pulgadas y centímetros. IMPORTANTE: Asegúrese de que el electrodoméstico que se instalará esté equipado con el gas que se surtirá. Consulte la placa de datos que se encuentra en la parte inferior de la caja del quemador para obtener esa información. No trate de convertir este electrodoméstico para usar otro tipo de gas que el que se especifica.
  • Página 13: Ubicación De Su Electrodoméstico

    Ubicación de su electrodoméstico Instalación de gabinetes por encima de la superficie para cocinar Coloque este electrodoméstico alejado de materiales combustibles como cortinas de ventanas y decoraciones de pared. A = 30″ (76,2 cm) de espacio El espacio libre horizontal mínimo entre el borde del libre vertical mínimo electrodoméstico y la construcción combustible que se entre la superficie para...
  • Página 14: Instalación Del Electrodoméstico

    Si está aprobada, se aplicarán las siguientes estipulaciones: PRECAUCIÓN: La garantía queda anulada en el equipo Maytag que se instale de manera diferente a la que Casas móviles recomienda el fabricante. La instalación de una estufa diseñada para instalarse en casas móviles debe estar en conformidad con las Normas...
  • Página 15 Conexión del electrodoméstico al ILUSTRACIÓN DE LA TUBERÍA DE suministro de gas SUMINISTRO DE GAS LA CONEXIÓN DEL SUMINISTRO DE GAS DEBE (SIN NINGÚN ELECTRODOMÉSTICO DEBAJO REALIZARLA UN TÉCNICO CALIFICADO O UN DE LA SUPERFICIE PARA COCINAR) INSTALADOR DE ELECTRODOMÉSTICOS DE GAS. Las pruebas de fugas de gas debe realizarlas el CAJA DEL QUEMADOR instalador de acuerdo con las instrucciones...
  • Página 16: Métodos Alternativos De Tubería Para Conectar El Electrodoméstico Al Suministro De Gas

    Métodos alternativos de tubería para Pruebas de presión conectar el electrodoméstico al El electrodoméstico debe aislarse del sistema de la tubería de suministro de gas cerrando la válvula de cierre suministro de gas manual independiente durante las pruebas de presión del sistema de la tubería de suministro de gas a presiones de UN TÉCNICO CAPACITADO O UN INSTALADOR DE prueba iguales o menores a 1/2 libras por pulgada...
  • Página 17: Información De Alambrado Eléctrico

    Información de alambrado eléctrico Este electrodoméstico está equipado con un cordón Al planear cualquier instalación, observe que la longitud eléctrico con conexión a tierra. Debe proporcionarse un libre del cordón eléctrico de este electrodoméstico, tomacorriente conectado a tierra. Se recomienda, por extendiéndose más allá...
  • Página 18 Conversión del electrodoméstico Instalación de la copa de orificio LP para usarse con gas LP 0,91 0,91 0,91 ADVERTENCIA La conversión a gas propano debe realizarla un TÉCNICO AUTORIZADO (u otra agencia calificada) de acuerdo con las instrucciones del fabricante y con todos los códigos y requisitos de las autoridades correspondientes.
  • Página 19 B. INVERSIÓN DE LA TAPA DEL REGULADOR DE PRESIÓN (Vea la figura 10) Una vez que se instala el electrodoméstico, debe ubi- - Después de ajustar el tornillo el quemador debe producir una carse el regulador según se indica en la figura 3 ó 4. llama azul estable, constante del tamaño mínimo.
  • Página 20: Para Convertir El Electrodoméstico Para Usarse Con Gas Natural

    Para convertir el electrodoméstico MODELO DE 4 QUEMADORES (DE 30″ DE ANCHO) para usarse con gas natural 1,55 1,55 ADVERTENCIA La energía eléctrica debe estar desconectada y la llave del gas debe estar cerrada antes de realizar la conversión. Si este electrodoméstico se convirtió para usarse con gas LP, deberán realizarse cada una de las siguientes modificaciones para volver a convertir la unidad para usarse con gas natural.
  • Página 21: Desempeño De Los Quemadores

    Desempeño de los quemadores PRECAUCIÓN: quemadores están diseñados para proporcionar la Nunca cubra las perillas de control ni ventilación óptima a todos los tipos de gas sin la superficie de control cercana con utensilios, toallas ni obturadores. Cuando funcionan correctamente, los otros objetos.
  • Página 22 Para sujetar la unidad al mostrador I M P O R T A N T E MOSTRADOR Se han incluido dos soportes para sujetar la superficie para cocinar al mostrador. Utilice los soportes de sujeción, uno a la izquierda y otro a la derecha de la unidad para asegurarla al mostrador.
  • Página 23: Manuel De Mise En Service

    PLAQUES DE CUISSON À GAZ À BRÛLEURS INTÉGRÉS MANUEL DE 36 po et 30 po MISE EN SERVICE IMPORTANT : Dimensions montrées en pouces et en centimètres IMPORTANT : S’assurer que l’appareil correspond au type de gaz fourni. Ces renseignements se trouvent sur la plaque signalétique, sous la boîte des brûleurs.
  • Página 24: Emplacement De Votre Appareil Ménager

    Emplacement de votre appareil Pose d’armoires au- -dessus de votre plaque de cuisson ménager Cet appareil doit être à un emplacement à distance sûre A = 30 po (76,2 cm) de tous matériaux combustibles tels que rideaux de minimum entre la fenêtres et décorations murales susceptibles de prendre plaque de cuisson et feu.
  • Página 25: Roulottes De Parc

    Si la plaque de cuisson est homologuée pour cet usage, les points suivants s’appliquent : ATTENTION : La garantie est nulle si les consignes de Maytag concernant la pose du matériel ne sont pas Maisons mobiles respectées. La mise en service d’une cuisinière prévue pour les maisons mobiles doit être conforme aux normes...
  • Página 26 Raccordement de l’appareil à l’alimentation en gaz ILLUSTRATION D’UNE CONDUITE DE GAZ LE RACCORDEMENT AU GAZ DOIT ÊTRE EFFECTUÉ PAR UN TECHNICIEN QUALIFIÉ OU (AUCUN AUTRE APPAREIL SOUS LA PAR UN INSTALLATEUR D’APPAREILS À GAZ. La PLAQUE DE CUISSON) vérification de l’absence de fuites sera effectuée BOÎTE DES BRÛLEURS par l’installateur conformément aux directives (ARRIÈRE DE L’APPAREIL)
  • Página 27: Vérification De La Pression

    Autres méthodes de raccordement de Vérification de la pression l’appareil à l’alimentation en gaz L’appareil à gaz doit être coupé des conduites de gaz en fermant son robinet d’arrêt individuel pendant toute LE RACCORDEMENT AU GAZ DOIT ÊTRE vérification de la pression dans les conduites de gaz à EFFECTUÉ...
  • Página 28: Câblage Électrique

    Câblage électrique Cet appareil est équipé d’un cordon d’alimentation avec En cas de planification de la pose, noter que la longueur raccordement à la terre. Il doit être branché dans une libre du cordon d’alimentation de cet appareil au--delà prise de courant reliée à la terre. Il est recommandé, pour d’un point à...
  • Página 29 Conversion de l’appareil Pose de l’écrou à orifice pour gaz GPL au gaz GPL 0,91 0,91 0,91 AVERTISSEMENT La conversion au propane doit être effectuée par un PRESTATAIRE DE SERVICE AGRÉÉ (ou tout autre service qualifié) conformément aux consignes du fabricant et à...
  • Página 30 B. INVERSER LE CAPUCHON DANS LE DÉTENDEUR (voir la figure 10). Une fois l’appareil en place, le détendeur doit se trouver à Une fois la vis de réglage serrée, le brûleur doit produire l’emplacement indiqué à la figure 3 ou 4. une flamme stable, bleue et d’une longueur minimum.
  • Página 31 Pour convertir l’appareil au gaz MODÈLE À 4 BRÛLEURS (30 PO [91,4 CM]) DE LARGE) naturel 1,55 1,55 AVERTISSEMENT Fermer le gaz et l’électricité avant de procéder à la conversion. Si cet appareil a été converti au GPL, chacune des modifications suivantes doit être effectuée pour le reconvertir au gaz naturel.
  • Página 32: Fonctionnement Des Brûleurs

    Fonctionnement des brûleurs ATTENTION : d’obturateurs d’air, quel que soit le gaz. S’ils fonctionnent Ne jamais couvrir les boutons de correctement, les brûleurs produisent une flamme commande ou leur pourtour avec des ustensiles, des uniformément bleue et clairement définie. Si la flamme est torchons ou autres objets.
  • Página 33: Informations Sur Les Pièces De Rechange

    Fixation de l’appareil au comptoir COMPTOIR I M P O R T A N T Deux supports de fixation sont fournis pour fixer la plaque de cuisson au comptoir. Utiliser les supports de fixation, un à gauche et un à droite, pour fixer l’appareil au comptoir.

Tabla de contenido