Remote Control; Button Function - Faber hoods victory Manual Del Usuario

- Control lights, if present.
• Clean the hood using a damp cloth and a neutral
liquid detergent.

REMOTE CONTROL

The appliance can be controlled using a remote control
powered by a 1.5 V carbon-zinc alkaline batteries of
the standard LR03-AAA type (not included).
• Do not place the remote control near to heat sources.
• Used batteries must be disposed of in the proper
manner.
4
Z
Button Function
Turns the Motor On/Off.
Decreases the speed of the
Motor.
Increases the speed of the
Motor.
INTENSIVE
- Activates Intensive speed
from any other speed.
To disable it, simply press the
same button again or turn the
motor off.
- Intensive speed is timed to
run for 6 minutes. At the end
of the 6 minutes the system
automatically returns to the
speed set previously.
- Can only be activated if the
Delay or 24h function is not
active.
Press briefly for the Delay
Function:
- Activates and deactivates
total shutdown of the hood
(motor+lights) after 30 minu-
tes:
To disable the Delay, simply
press the button again or turn
the motor off.
- Can only be activated if the
Intensive or 24h function is
not active.
Press and hold for 2 sec. for
the 24H Function:
- Can only be activated if the
Intensive or Delay function is
not active.
- Activates and deactivates the
24H function for 10 minutes
every hour, for 24 hours. After
this time it is deactivated.
To deactivate the 24h function,
press the same button again
or press the button that turns
the motor on/off.
Turns the Hood lights On/Off.
Display
The LED on the
motor button (on
the hood controls)
turns on and off
with the motor.
-
-
The led on the
motor button (on
the hood controls)
will flash once a
second.
The led on the mo-
tor button (on the
hood controls) will
flash once every
0.5 seconds.
The led on the mo-
tor button (on the
hood controls) will
flash once every 2
seconds.
-