KONTROL pH/REDOX Manual De Instalación página 5

2.1__SYSTEM FIXING
2.2__DESCRIPTION OF THE PARTS
1 Electronic tool PR40 pH
2 Electronic tool PR40 Rx
3 Dosing pump
4 Flow sensor
5 pH and Rx probe holder
6 Power supply cable
7 Panel
2.3__HYDRAULIC CONNECTIONS
See figure for inlet and outlet
2.4__ALARM INTERVENTIONS
For alarm interventions on the measurement tool, please read the relative manuals.
3___SETTINGS AND OPERATION
3.1__HYDRAULIC OPERATION
Connect the delivery and the discharge and set 60 l/h with the flow regulator,
check that there are no leaks.
3.2__PROGRAMMING AND SETTINGS
For the programming, please read about the measurement tools.
4___MAINTENANCE
Ensure that the hydraulic section is constantly clean (see figure).
5___TROUBLESHOOTING

For leaks, check the hydraulic connections.

For pH or Redox measurement errors, refer to the measurement tool manual.
KONTROL 40 pH/Redox Cod. 0000136989 rev. 1.0
INLET
OUTLET
4