Vacuum Cleaner Description; Vacuum Cleaner Parts And Labels; Optional Kits; Accessories - Blastrac BDC-22-110V Manual De Instrucciones

Instruction manual BDC-22-110V

Vacuum Cleaner Parts and Labels

1.
Identification plate which includes:
Model Code, Technical Specifications (see table on page
6), Serial N°., Year of manufacture, Input voltage.
2. Longopac bag for collecting vacuumed material.
®
3.
Inlet
4. Inlet plug.
5. Air outlet.
6. Caster locking lever.
7. Handle.
8.
Closing band lever.
9. Safety bolt.
10. Warning plate.
Draws the operator's attention to the fact that the filter
must only be shaken when the vacuum cleaner is turned
OFF (see also par. "Primary filter shaker").
11. Plug for connecting the vacuum cleaner to an electrical
socket.
12. Silica Dust Warning
Draws the operator's attention to the fact that exposure of
a crystalline silicon ust can cause cancer or silicosis.
This vacuum cleaner creates a strong air flow which is drawn
in through the inlet (3, Fig. 1) and blown out through the outlet
(5, Fig. 1).
Before turning on the vacuum cleaner, fit the vacuum hose into
the inlet and then fit the required tool on to the end part (refer
to the manufacturer's accessory catalogue or Service Center).
I
The diameters of the authorized hoses are indicated in the
Technical data table.
US
The vacuum cleaner is equipped with a main filter which
enables it to be used for the majority of applications.
Besides the primary filter, which retains the most common types
of dust, the vacuum cleaner can be fitted with a secondary filter
(absolute class H) with a higher filtering capacity for fine dusts
and dusts that are hazardous to health.

Vacuum cleaner description

Figure 1

Optional Kits

Please contact the manufacturer's sales network for information
on optional kits.
Instructions for installing the optional kits are included in the
conversion kit.
WARNING!
Use only genuine optional kits supplied and authorized
by the manufacturer.
Optional kits must be installed by qualified Nilfisk
personnel.

Accessories

Various accessories are available; refer to the manufacturer's
accessory catalogue.
WARNING!
Use only genuine accessories supplied and authorized
by the manufacturer.

Packing and unpacking

Dispose of the packing materials in compliance with the laws
in force.
Figure 2
A
MODEL
in
BDC122 27.5
(*) Weight with packing

Unpacking, moving, use and storage

Operate on flat, horizontal surfaces.
The load-bearing capacity of the surface the vacuum cleaner is
placed on must be suitable for bearing its weight.
www.blastrac.com ‒ info@blastrac.com
4/16
B C
lb (*)
in in
31.4 59.0 116.8