Bebesounds BE006 Manual Del Usuario página 11

TO RECORD FROM THE BÉBÉSOUNDS MONITOR
1. Plug the L-shaped end of the recording cable (see Fig. 4) into either
jack of the BébéSounds Fetal Monitor and the straight end into the
line input of your tape recorder. (Some portable recorders do not
provide this input.)
2. Position the Monitor on your bare skin so that you can hear the
sounds you wish to record.
3. Adjust the recording level on your tape recorder if necessary.
4. Hold the Monitor very still and begin recording.
Remember, the sound of your heartbeat has a very calming and
soothing effect on your newborn baby. You may want to record your
own heartbeat before your baby is born. You will then be able to play
back your recorded heartbeat to your baby after birth. We recommend
a 30-minute recording. (You will have to reduce the volume when you
record your own heartbeat since it is much louder than your unborn
baby's.)
The Prenatal Heart Listener
product and cannot be returned to the retailer.
All Exchange And Refund Requests Should
If you are having difficulty, have questions, or
need assistance, call our Help Desk toll free at
1-888-232-6476 Mon-Fri from 9:00AM-5:00PM EST.
Be Directed To Our Help Desk
®
is a personal care
11