SSS Siedle Access AVP 870-0 Informacion De Producto página 5

Pflegehinweise
Reinigen Sie Ihr Innengerät nur
mit einem mit milder Seifenlösung
angefeuchteten, weichen Tuch.
Trockene Reinigung, aggressive
Reiniger und Scheuermittel können
die Oberfläche beschädigen.
Ausführliche Pflegehinweise im
Downloadbereich unter
www.siedle.com.
Technische Daten
Betriebsspannung:
PoE nach 802.3af
Umgebungstemperatur:
+5 °C bis +40 °C
Abmessungen (mm) B x H x T:
202 x 202 x 30
English
Application
Access video panel with touchscreen
17.8 cm for the Access system,
made of high-grade plastic.
The panel is a system product with a
low-profile surface-mount housing
for wall and table-top mounting.
It provides ergonomically designed
intuitive user prompting with gesture
control.
With the functions calling, speech,
vision, door release, light, remote
switching and call silencing.
Performance features:
• Individual crafted design concept
offering a wide choice of varied fea-
tures and finishes
• Display offers graphic scope for
individual operation
• 17.8 cm (7") touchscreen, resolu-
tion 800 x 480 Pixel
• Brilliant image reproduction
• Excellent audio quality (dual loud-
speaker technology)
• Input for storey call
• Output freely programmable
• Additional inputs and outputs
with Access input/output accessory
AZIO 870-...
• Call differentiation between door
calls, storey calls, and internal calls
• Switching functions
• Video memory function
• Can be used with table-top acces-
sory AZTVP 870-... as a table-top
device
• Update capability using the Access
server
Electrical voltage
Mounting, installation and servicing
work on electrical devices may only
be performed by a suitably qualified
electrician.
Electrostatic charging
As a result of electrostatic charging,
direct contact with the circuit board
can result in destruction of the
device.
Direct contact with the circuit board
must therefore be avoided.
Scope of supply
• AVP 870-... (Base plate and
housing with circuit board)
• RJ45 plug 2 x
• Dummy card for SD card insert
• this product information
Mounting
During installation, where applicable
ensure that the surface is protected
from damage.
1 Recommended mounting height
appr. 1.60 m to display height/
viewing height.
2 Open the device from the back
by releasing the base plate with the
locking lever.
3 Align the base plate centrally rela-
tive to the flush mounted box and
mark the fixing holes.
When mounting directly on the wall,
fasten the base plate using 4 screws,
paying attention that the plate is the
right way up (top marking).
4 First connect the RJ45 plug with
the circuit board and then with the
junction box.
5 Hook the housing into the base
plate from above and close by
exerting a slight pressure.
Dismantling
6 To remove the housing, press
the lock upwards using a flat blade
screwdriver.
The circuit board remains in the
housing superstructure.
7 Carefully disconnect the RJ45 plug
from the junction box.
3