Grundig Sonoclock 795 DCF Manual De Instrucciones página 24

OPERATION
Viewing the alarm time
1
Press »SET« twice (for alarm time
1) or three times (for alarm time 2).
– Display: the last set alarm time
1 or 2, the LED
»AL 2
Note:
If no other button is pressed, the
7
device switches back automati-
cally to the current time after
10 seconds.
Alarm with radio station
1
Press » « to switch on the device.
2
Select the radio station using the
»-TUNING+« dial.
3
Adjust the alarm volume by pressing
»HOUR/VOL+« or »MIN/VOL-«.
4
Set the radio station you want as
an alarm signal (» «), and press
»AL1« or »AL
– Display: the corresponding LED
»AL 1
lights up.
5 Press » « to switch off the device.
– The device wakes you up at the
set time with the radio station
(alarm duration is 59 minutes).
Alarm with signal tone
1
Press » « to switch off the device.
24 ENGLISH
_____________________________________
»AL 1
« flashes.
2« twice.
»AL 2
« or
2 Set the signal tone alarm signal
(» «), and press
once.
– The device wakes you up at
the set time with the signal tone
« or
(alarm duration is 59 minutes).
Interrupting the alarm
1
Press »SNOOZE« while the
alarm is sounding.
– The alarm signal (radio station
or signal tone) stops.
– The alarm goes on again at
9 minute intervals (alarm dura-
tion is 59 minutes).
Cancelling the alarm for the
day
1
Press » « while the alarm is
sounding.
– The alarm signal (radio station
or signal tone) stops, the alarm
remains at the set time for the
next day.
«
Deactivating and activating
alarm standby
1
To deactivate the alarm, press
1« or
»AL
the LED
disappears.
– The set alarm time is saved.
1« or
»AL
2« repeatedly until
»AL
»AL 1 »AL 2
« or
2«
»AL
«