Glacier bay LT2007WWHD Instrucciones De Ensamble E Instalación
Centro de lavado con grifo desmontable
Ocultar thumbs
Ver también para LT2007WWHD:
- Manual del usuario (10 páginas) ,
- Instrucciones de ensamble (10 páginas)
Publicidad
Enlaces rápidos
Assembly & Installation Instructions
Laundry Work Center with Pull-Out Faucet
Model # / Modelo #
LT2007WWHD
Part
Description
Pieza
Descripción
A
B
C
D
E
Hose guard with soap dish
Protección de manguera con jabonera
Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at 1-855-HD Glacier, 8 a.m.-6 p.m., EST, Monday-Friday. www.HOMEDEPOT.com
¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a nuestro departamento de
servicio al cliente al 1-855-HD Glacier, de lunes a viernes de 8 a.m. a 6 p.m., hora del Este. www.HOMEDEPOT.com
Pg 1 of 9
White
Sink basin
Fregadero
Legs
Patas
Towel Bar
Barra para toalla
Shelf
Repisa
Instrucciones de ensamble e instalación
Centro de lavado con grifo desmontable
Part
Quantity
Quantité
Pieza
F
1
G
4
1
H
1
1
Blanc
Description
Description
4 in. Faucet
Grifos de 4 in.
Plumbing
Conexiones
Drain Stopper
Tapón de drenaje
Needed / Necesarias
MCS
8/19/2013
Quantity
Quantité
1
1
1
IS7373
Publicidad
Manuales relacionados para Glacier bay LT2007WWHD
Resumen de contenidos para Glacier bay LT2007WWHD
- Página 1 Assembly & Installation Instructions Instrucciones de ensamble e instalación Laundry Work Center with Pull-Out Faucet Centro de lavado con grifo desmontable White Blanc Model # / Modelo # LT2007WWHD Part Description Quantity Part Description Quantity Pieza Descripción Quantité Pieza Description Quantité...
- Página 2 Model # / Modelo # LT2007WWHD backsplash salpicadero Place the tub upside down on a smooth elevated surface such as 2X4’s or blocks to protect the backsplash on the tub. Insert legs (B) into back corner sockets, driving the legs in completely, as shown. NOTE: If necessary, use a hammer and a piece of wood to carefully drive them in completely.
- Página 3 Model # / Modelo # LT2007WWHD Insert one leg (B) into front corner socket, driving the legs in completely. With the last leg (B) place towel bar into the bar bracket and insert legs (B) into front corner socket making sure the other end of the towel bar is inserted into the opposite bar bracket, as shown.
- Página 4 Model # / Modelo # LT2007WWHD hole indicators indicadores para los agujeros soap dispenser dosificador de jabón For convenience, this unit is pre-dilled for included faucet (F). However virtually any faucet, including single or dual handle faucets with 4 in. or 8 in. centers, as well as a soap dispenser and side sprayer can be installed. NOTE: Drill from the underside of the faucet deck to mark the center, then turn the sink upright to finish cutting with hole saw.
- Página 5 Model # / Modelo # LT2007WWHD Sold separately 15-7/8 in. Se venden porseparado 15-7/8 in. 17 in. 17 in. RECOMMENDED: Floor mounting recommended for added stability. Use 1/4 in. diameter screws, washers and/or anchors appropriate for your flooring type. Sold separately.
- Página 6 Model # / Modelo # LT2007WWHD Place hose guard with soap dish (E) into either side of the tub (A) depending on which side washer is located. Shown for left side use. Re-attach shelf (D) to legs (B), as shown. NOTE: Shelf (D) can be placed into the tub (A) to use as a work surface or drying board.
- Página 7 Model # / Modelo # LT2007WWHD Plumbing (G) / Conexiones (G) existing waste drain tube tubo de desagüe existente NOTE: Plumbing should be done by a qualified plumber and in accordance with National and Local Plumbing Codes. NOTA: Las conexiones deben ser realizadas por un fontanero autorizado y según los códigos de fontanería...
- Página 8 Model # / Modelo # LT2007WWHD Faucet (F) / Grifos (F) Fig. 2 Fig. 1 Fig. 1: Position faucet (2) on tub (A). Hand tighten locknuts (3). Pass hose (4) through faucet and adjust the position of the faucet so that hose (4) does not rub against the edge of the sink hole. Slide hose through nut (5) and zinc weight (6) onto hose assembly, as shown.
-
Página 9: Troubleshooting / Solución De Problemas
Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our limited lifetime warranty. Glacier Bay products are warranted to the defects in materials or workmanship for a period of one year from the date of original purchase.