Danfoss VLT MICRO Manual Del Usuario página 16

No. Parameter Function
Name Explanation
66 Master Freq.
67 Frequency Skip frequency 1
68 Setting Skip frequency 2
69 Prohibited Skip frequency 3
70 Freq. Band- Skip freq. Band
width Setting
Prevention
71 PWM Carrier Carrier frequency
Frequency select
72 Auto Reset/Restart Oper. After Fault d00 - d10
73 Fault Records Most recent fault
record
74 2nd most recent
fault record
75 3rd most recent
fault record
76 Key Key
Parameter parameter
77 Auto Decel. Auto deceleration
Gain Key gain key
VLT
Parameter
Value
d0.1 - 400 Hz
d0.0 - d400. Hz
d0.0 - d400. Hz
d0.0 - d400. Hz
d0.1 - d20.0 Hz
d0.1 - d20.0 Hz
d01 - d18; fc = 1kHz ~ 18kHz
d00:Fault records clear (No
errors occurred)
d01: Over-current (oc)
d02: Over-voltage (ov)
d03: Overheat (oH)
d04: Overload (oL)
d05: Overload 1 (oL1)
d06: External fault (EF)
d07: CPU failure 1 (CF1)
d08: CPU failure 3 (CF3)
d09: Hardware protect failure (HPF)
d10: O.C. during acceleration (oCA)
d11: O.C. during deceleration (ocd)
d12: O.C. during steady state (ocn)
d13: Ground fault or fuse fail (GFF)
d14: EEROM abnormal 2 (CF2)
d15: Manufacture used diagnostics
d16: Manufacture used diagnostics
d17: External baseblock (bb)
d18: Overload 2 (oL2)
d19: Manufacture used diagnostics
d20: Soft protection efficient (codE)
d00: All parameters can always be
set and read
d01: All parameters are read-only
d02 - d09: not used
d10:Resets all parameters to the
factory defaults
d00: Auto deceleration gain key
d01: Able to adjust the gain value
14
® MICRO
Factory
Setting
d1.0
d0.0
d0.00
d0.00
d0.00
d15
d00
d00
d00
d00
d00
d00