Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2. CONFIGURING AND PAIRING
WITH THE SYSTEM
ELDES
Configuration Tool
If you are unable to pair the wireless de-
vice, please restore the parameters of the
wireless device to default and try again
(see 5. RESTORING DEFAULT PARAM-
ETERS for more details)
3. EWM1 PGM
OUTPUT AND TAMPER
Upon successful EWM1 pairing process, the system
adds 1 wireless PGM output intended for electrical ap-
pliance connection, control and power consumption
monitoring and 1 Instant-type wireless zone (by default
- disabled) for tamper control.
Once the wireless zone is enabled, the wireless con-
nection loss between EWM1 and ELDES alarm sys-
tem would lead to tamper alarm followed by SMS text
message to the listed user (-s) (by default - disabled)
as well as fault indica tion by the keypad. The SMS text
For more details on how to
configure and pair the device
with the system, please refer
to EL DES Configuration Tool
soft ware's HELP section or
ELDES alarm system's instal-
lation/user manual.
EN
7
Publicidad
Tabla de contenido
