MidRone ADVENTURE Guía De Usuario página 22

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

BEFORE FLYING
Settle in a space without obstacles with a clearance of about ten meters around you and five meters in
height at least.
Ensure that the battery of the drone and batteries from remote control are fully charged.
Before turning the drone, check that the left joystick of the remote controller is completely pulled down in
the center.
PREPARATION FOR TAKE OFF
Connect the battery of the drone, the drone LED lights flash rapidly. Then
place the drone to the ground or on a flat surface and turn on the remote
control.
Before each flight you must establish the link between the drone and
remote control by performing this operation: Push the left joystick fully
upward and then pull it to the bottom. A beep sounds when the joystick is
at the top and another beep when it is at the bottom. The 2 beeps indicate
that the synchronization is successful and that the drone is ready to fly.
FLYING CONTROL
ACCELERATOR (left joystick)
Push the left joystick up: the drone rises.
Pull the left joystick down: the drone descends.
LEFT / RIGHT TURN (left joystick)
Push the left joystick to the left: the drone turns on itself to the left.
Push the left joystick to the right: the drone turns on itself to the right.
FORWARD / BACKWARD FLY (right joystick)
Push the right joystick up: the drone flies forwards.
Push the right joystick down: the drone flies backwards.

Publicidad

Tabla de contenido

Solución de problemas

loading

Productos relacionados para MidRone ADVENTURE

Tabla de contenido