MidRone ADVENTURE Guía De Usuario página 23

SIDEWARD FLY (right joystick)
Push the right joystick to the left: the drone fly leftwards
Push the right joystick to the right: the drone fly rightwards.
FORWARD / BACKWARD MICRO-ADJUSTMENTS (TRIM)
SIDEWARD MICRO-ADJUSTMENTS (TRIM)
FLYING IN CF MODE (DIRECTION LOCK, HEADFREE)
When this mode is enabled, the drone uses the direction it has stored at the time of synchronization and
takes the pilot's position as a reference when using the right joystick on the remote. The movement front
or back of this joystick will move away the drone or let it come closer from the pilot, and regardless of
the orientation of the front of the drone.
The operation of this mode requires that the pilot remains in the same place as at the time of
synchronization and keeps the drone in front of him during the
flight.
1. FLY DIRECTION SETTING
Before the flight, place the drone in front of you with the back
of the drone pointing to the remote control.
Connect the battery of the drone, the LED lights will flash
waiting for the remote synchronization procedure. Perform this
procedure as explained earlier in this manual in "preparation for
take off" section.
Proceed to take off by pushing the left joystick forward.
2. Once this step is done and the drone is flying, press the mode switch
button on the remote control to activate CF Mode / Direction Lock.
The remote will beep (2 beeps) and the LED lights of the drone will
flash quickly to confirm that this mode is engaged.
3. Press again the mode switch button on the remote to exit the CF