Sunny Health & Fitness SF-B1203 Manual Del Usuario página 10

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1- 877 - 90SUNNY (877-
907-8669).
#35 M6*8 1pc
#85 S=13,14,15 1pc
#18 M8*40 4pcs
#19 GB/T 95-2002 8 4pcs
#86 6＃(86X35) 1pc
ASSEMBLY INSTRUCTIONS
STEP 1:
Remove 4 Flat Washers (No. 19) and 4 Bolts (No.
18) from Front Stabilizer (No. 3) and Rear
Stabilizer (No. 2) with Inner Hexagon Spanner
(No. 86).
Attach the Front Stabilizer (No. 3) and Rear
Stabilizer (No. 2) to the Main Frame (No. 1) using
4 Flat Washers (No. 19) and 4 Bolts (No. 18) that
were removed. Tighten and secure with Inner
Hexagon Spanner (No. 86).
Remove Bolt (No. 35) from Main Frame (No. 1)
with Crosshead Spanner (No. 85).
Insert the Tension Control Knob (No. 32) into the
Main Frame (No. 1) using 1 Bolt (No. 35) that is
removed. Tighten and secure with Crosshead
Spanner (No. 85).
STEP 2:
Loosen and pull out the Adjustment Knob (No. 10)
and insert the Seat Post (No. 4) into the seat post
tube of the Main Frame (No. 1). Then, select the
desired height. Release the knob and re-tighten the
knob.
Remove Adjustment Knob (No. 30) from Seat
Slider (No. 5) by hand. Then attach Seat Slider
(No. 5) onto Seat Post (No. 4). Tighten and secure
with the Adjustment Knob (No. 30) that was
removed.
Remove 3 Lock Nuts (No. 22) and 3 Flat Washers
(No. 21) from the back of Seat (No. 20) with
Crosshead Spanner (No. 85).
Attach the Seat (No. 20) onto Seat Slider (No. 5)
with 3 Lock Nuts (No. 22) and 3 Flat Washers
(No. 21) that were removed. Tighten and secure
with Crosshead Spanner (No. 85).
9