Transferring a Call
- If you make a call from the handset, the call will (depending on the phone settings) automatically
transfer to the headset. If the call is not automatically transferred, you can manually transfer the
call to or from the headset by pressing the PLAY/PAUSE/STOP button twice on the HBS-900
(handset and headset must be paired).
Voice Dialing
- Briefly press the CALL button to activate Voice Command. For best results, record the voice
dialing tag through your headset.
NOTE: If your handset does not support voice dialing, this action may activate Last Number Redial.
Last Number Redial
- Press and hold the CALL button for 1 second to activate Last Number Redial.
The headset will beep and then call the last number dialed.
Ending a Call
- Briefly press the CALL button.
Call Waiting
- Answer a second call without hanging up the first call by pressing the CALL button for 1 second.
Press the CALL button for 1 second to return to the original call.
- Briefly press the CALL button to terminate both calls at once.
Rejecting a Call
- Activate call reject by pressing the CALL button for 2 seconds when the handset rings.
* These functions may only be used if your handset supports them. For further information about
using these features, please consult your handset's user manual.
Mic Mute
- Slide the VOLUME switch to the + position and the FF/REW switch to the REW position at the
same time for 1 second to mute/unmute the Mic during conversation.
* Precaution: For your safety, do not operate microphone mute during driving.
6