Smith 190449 Manual De Uso Y Cuidado página 3

Assemble Hose To Tank
IMPORTANT: Do not attempt to heat or alter hose,
hose nut, or barb prior to assembly.
1. Align hose barb tabs, push hose barb into tank
until it stops (See Figure A).
2. Slide hose nut into place and turn clockwise to
tighten. (See Figure B).
NOTE: Do not use tools to tighten hose nut.
SM II
Assemble Extension, Shut-Off & Nozzle
1. Install the extension onto the shut-off
assembly and tighten the nut securely.
(See Figure C)
2. Install selected nozzle onto the end of the
extension and tighten securely. (See Figure D)
NOTE: BRASS NOZZLES CAN NOT BE USED ON ACID SPRAYERS.
RED HIGH VOLUME
FAN NOZZLE USES:
Used on
1. Turf and Argiculture Series (Green)
2. Industrial and Contractor Series (Orange)
3. Cleaning and Restore Series (Blue)
SPRAY
ANGLE:
70°
ADJUSTABLE CONE USES:
Used on
1. Turf and Argiculture Series (Green)
2. Industrial and Contractor Series (Orange)
3. Cleaning and Restore Series (Blue)
4. Pest Control Series (White)
ASSEMBLY INSTRUCTIONS
SPRAY FLOW
RATE:
PATTERN:
FAN .25 GPM
Figure A
Figure C
YELLOW LOW VOLUME
FAN NOZZLE USES:
Used on
1. Turf and Argiculture Series (Green)
2. Industrial and Contractor Series (Orange)
3. Cleaning and Restore Series (Blue)
SPRAY SPRAY FLOW
RATE:
ANGLE: PATTERN:
.15 GPM
30° FAN
CERAMIC CONEJET TIP
NOZZLE USES:
Used on
1. Turf and Argiculture Series (Green)
2. Industrial and Contractor Series (Orange)
3. Cleaning and Restore Series (Blue)
4. Pest Control Series (White)
SPRAY SPRAY FLOW
COLOR
ANGLE: RATE:
PATTERN:
.07 GPM
80° FAN #4 GREEN
FAN .10 GPM
80° #6 RED
80° FAN .10 GPM #10 BLACK
80° FAN
.13 GPM #8 GRAY
80° .20 GPM #12 BROWN
FAN
Figure B
Figure D
Page 3