6 - ENGLISH
SM600-1 & SM600-2 PARTS LISTING
No.
Fig. Description
SM68
A
Sensor only with screws (single channel for non-positioner motor)
SM603
B
Treadle Sensor Plate Assembly complete with 4 screws (single channel for non-positioner motor) (431C)
SM618
C
Complete wire harness for 110 volt models, fused (877C)
SM619
D
Fuse only for 110 volt wire harness
SM620
E
Fuse cap for 110 volt wire harness
SM621
F
On/Off toggle replacement switch only
SM78
G Complete horizontal wire harness for 220 volt models (431C)
SM622
H
SM600-1 label
SM623
H
SM600-2 label
SM625
I
SM600 Pro control box cover with 4 screws (431C Matte)
SM627
J
2 Digit LED display with screws
SM628
K
SM600-1 Circuit board with 6 screws
SM629
K
SM600-2 Circuit board with 6 screws
SM631
L
Motor mounting bracket complete with 4 screws (431C)
SM50
M 50mm pulley with mounting hardware
SM60
M 60mm pulley with mounting hardware
SM75
M 75mm pulley with mounting hardware
SM80
M 80mm pulley with mounting hardware
SM90
M 90mm pulley with mounting hardware
SM100
M 100mm pulley with mounting hardware
SM79
N
Pulley cover bracket with screws and washers
SM86
O Pulley cover with screw and washer (431C Matte)
SM632
P
Rear motor cover panel SM600-1 and SM600-2 with 6 screws (431C)
SM81
R
Power inlet receptacle with wires, terminals and screws complete
www.endurosaves.com
SM600-1&2 2011